SVZ-KP36NA Mitsubishi 36,000 BTU Multi Position Mini Split Indoor Air Handler

• Ducted Air Handler
• Type 1-Zone, Indoor, Multi-Position, High Efficiency
• Voltage Rating 208/230 Volt AC
• Current Rating 3.3 Amp (Fan Motor)
• Frequency Rating 60 Hertz
• Number of Phases 1
• Power Rating 3720 Watt at 95 Deg F (Cooling), 3100 Watt at 47 Deg F (Heating)
• Cooling Capacity 33000 BTU/Hour
• Temperature Control Type Thermostat
• Connection Type Terminal Block
• Operating Temperature 67 to 90 Deg F Dry Bulb, 57 to 71 Deg F Wet Bulb (Cooling)/70 to 80 Deg F Dry Bulb (Heating)
• Installation Wall
• Enclosure Material Steel
• Enclosure Finish Galvanized
• Size 21 Inch Width x 21-5/8 Inch Depth x 43-3/4 Inch Height
• Weight 129 Pound
• Approval ETL (Canada and US)
• Refrigerant Type R410A
• Energy Efficiency Ratio 16 SEER, 11.7 HSPF
• Heating Capacity 36000 BTU/Hour at 47 Deg F
• Minimum Circuit Rating 4.13 Amp
• Airflow Rating 767 to 910 CFM (Dry/Wet)
• Power Factor 99 Percent (Cooling), 98 Percent (Heating)
• External Static Pressure 0.3 to 0.8 Inch WG
• Drain Pipe Size 3/4 Inch
• Heat Exchanger Type Plate Fin Coil
• Compressor Motor Type Driven DC Inverter
• Application Residential, Commercial, Light Industrial Environment
• Applicable Standard AHRI

Install Instructions
Specification Sheet

Ducted Air Handler Provides a Solution to Cool and Heat Larger Zone. Highly Efficient Completely Enclosed EC Motor. Selectable External Static Pressure 0.3, 0.5 and 0.8 Inch WG with 3 Fan Speed at Each Static Setting. 1 Inch R4.2 Fiberglass Free Insulation Reduces Condensation and Increases efficiency. Positive Pressure Cabinet with Air Leakage of Less than 2.0% at 1 Inch WG (Tested per ASHRAE Standard 193). Unique Blow Through Design Allows Simple Coil Cleaning When the Blower is Removed. Multi-Position Installation Horizontal (Left or Right), Vertical (Upflow). 3-Speed Fan.