1-1/4" X 10' SCH 40 PVC Electrical Conduit

• Electrical Conduit
• Type Smooth Solid Wall
• Trade Size 1-1/4"
• Length 10'
• Inner Diameter 1.38"
• Outer Diameter 1.66"
• Wall Thickness 0.14"
• End Style Belled
• Schedule 40
• Installation Solvent Weld
• Material PVC
• Weight 45 Lb per 100'
• Standard Package 900' per Lift (Retail), 3300' per Lift (Wholesale)
• Applicable Standard ANSI/UL 651, NEMA TC-2
• Approval UL
• Thermal Conductivity 1.3 BTU
• Application Power, Telephone and Other Electrical Duct System

Jam Eagle Offers a Complete Line of Electrical Conduit and Power Duct Pipe Product; All Electrical Conduit and Power Duct Pipe Products are Offered in 20 And/or 10-Foot Standard Laying Length, so that more Ground can be Covered During Installation While Eliminating the Cost of Unnecessary Joints; Schedule 40 Conduit is Designed with Safety, can be Used in a Variety of Everyday Applications Both Above-Ground and Underground Installations; PVC is Non-Conductive and Provides an Additional Insulation Barrier to Minimize Electrical Interference from High Power Lines; It has a Very High Melt Index and is a Self-Extinguishing Material, as a Result PVC Conduit may Prevent Ignition of Fires from Shorted Wires or Bad Circuits; Carefully Designed and Manufactured to Provide an Interior Surface that will Not Nick or Tear the Wiring Insulation; Pipe has a Smooth Interior that Allows for Wires to be Pulled Through Easily without Hanging or Binding; Highest Quality Control Standards; Rated for use with 90 Deg Celsius Conductors; Light Weight; Ultraviolet Protection; High Impact and Deformation Properties; Solvent Cemented Joint; Superior Dielectric Strength; Unaffected by Electrolytic or Galvanic Corrosion or any Known Corrosive Soil or Water Condition; Easy Installation, with Solvent Weld Fittings and Elbows Minimizing the Need to Carry Around Pipe Benders or Thread; It Easy to Load, Easy to Transport and Easy to Handle