655-DS Sioux Chief HydraRester 1" Sweat/Press-Fit Water Hammer Arrester Type D
SC655DS
MFG #: 655-DS
- Manufacturer Name: Sioux Chief
- Description
- Documents
- Specifications
Sioux Chief 650 Series piston-type water hammer arresters shall be required in piping systems. Water hammer arresters shall have sufficient volume of air to dissipate the calculated kinetic energy generated in the piping system. Arresters shall be effective when installed at any angle. Arresters shall be approved for installation with no access panel required. Water hammer arresters shall be ANSI/ASSE 1010 2004 certified. Arresters shall be sized and placed per manufacturer’s instructions.
- Certified by ASSE to the ANSI/ASSE 1010 Standard
- Lifetime cycle tested to withstand 10,000 shock cycles
- Connections are compatible with press-fitting systems and all push-fitting systems
- Can be installed at any angle, and without access panels
- Do Not overheat – Do Not braze