J15S Goulds 1-1/2 HP 115/230V Shallow Well Jet Pump

GOUJ15S MFG #: J15S
GOUJ15S
  • Manufacturer Name: Goulds
  • Specifications
  • Documents
  • Description
  • Jet Pump
  • Type Back Pullout
  • Applicable Standard CSA, UL 778, FDA
  • Suction Size 1-1/4"
  • Discharge Size 1"
  • End Connection Threaded x Threaded
  • Overall Dimensions 19-1/4" Length x 9-7/8" Width x 8-4/3" Height
  • Flow Rate 10.1 to 26.6 GPM Shallow Well
  • Discharge Head 5 to 25' Shallow Well
  • Shaft Material Stainless Steel
  • Impeller Material Glass Filled Noryl
  • Warranty 12 Month from Date of Installation, 18 Month from Date of Manufacture
  • Shaft Seal Details Mechanical Seal
  • Pressure Switch Type Pre Set
  • Pressure Switch Setting 30 to 50 PSI
  • Power Rating 1.5 HP
  • Input Supply Rating 115/230 Volt at 60 Hertz 1 Phase
  • Speed Rating 3500 RPM
  • Temperature Rating 140 Deg F
  • Motor Type NEMA Double Compartment Dual Voltage Capacitor Start
  • Inclusions/Features Pump, Shallow Well Jet, Motor, Pressure Switching, Tubing, Nozzle Clean-Out Plug
  • Application Shallow Well, Home, Cottage, Booster Service
  • Thermal Load Protection Automatic Reset
  • Rotation Type Clockwise
  • Weight 60 Lb
Compact Design has an Integral Shallow Well Adapter Built into the Casing, which Eliminates the Need for a Separate Shallow Well Adapter. Back Pull-Out Design Allows Disassembly of Pump for Service Without Disturbing Piping. Two Compartment Motor for Easy Access to Motor Wiring and Replaceable Components. Nozzle Clean Out Plug in Pump Case. Corrosion Resistant, Engineered Plastic Tubing and Fittings are Easily Removed for Cleaning. Premium O-Ring Design Fittings Need Only be Hand Tight to Seal. Impeller FDA Compliant, Glass Filled Noryl. Corrosion and Abrasion Resistant. Diffuser (Guide Vane) Bolt Down Diffuser Provides Positive Alignment with Impeller. Diffuser also has Stainless Wear Ring for Extended Performance in Abrasive Conditions. FDA Compliant, Injection Molded, Food Grade, Glass Filled Lexan for Durability and Abrasion Resistance. Powered for Continuous Operation. Pump Ratings are Within the Motor Manufacturer's Recommended Working Limits. Can be Operated Continuously Without Damage. Corrosion Resistant. Electro-Coated Paint Process is Applied Inside and Out then Baked on. Protected Mechanical Seal. Special Diaphragm Design Retains Water in the Casing at All Times to Ensure the Mechanical Seal Can Never Run Dry. Excellent Air Handling Ability. After Initial Priming the Pump has the Ability to Re-Prime Itself Even when Air Gets into the System. Pumping Resumes Once the Water Level Rises above the Foot Valve. 12 Month from Date of Installation, 18 Month from Date of Manufacture Warranty.