264-0005 Zoeller BN264 Waste-Mate Cast Iron Automatic Sewage Ejector Pump With Float 115V 4/10 HP 1725 RPM 2" Discharge Size And 2" NPT Discharge End Connection And 15 Ft Power Cord

• Dewatering Effluent Pump
• Type Submersible
• Applicable Standard UL 778, CSA (Canada and US), CSA C22.2, SSPMA
• Discharge Size 2"
• End Connection Threaded Outlet
• Overall Dimensions 13.14" Length x 11.358" Width x 14-3/4" Height
• Float Type 2-Pole Piggyback Variable Level Mechanical
• Flow Rate 23 to 90 GPM
• Discharge Head 5 to 15'
• Casing Material Powder Coated Epoxy Finished Cast Iron
• Shaft Material A151 1215 Steel
• Housing Material Powder Coated Epoxy Finished Cast Iron
• Impeller Material Glass Filled Plastic
• Impeller Design Non-Clogging Vortex
• Shaft Seal Details Carbon-Ceramic Face Mechanical Seal
• Solid Size 2"
• Power Cord Length 15'
• Power Rating 4/10 HP
• Input Supply Rating 115 Volt 60 Hertz 1 Phase 9.4 Amp
• Speed Rating 1725 RPM
• Temperature Rating 130 Deg F
• Motor Type Oil Filled Hermetically Sealed
• Inclusions/Features Automatic Operation, Stainless Steel Arm, Bolt, Guard, Handle and Screw, Seal Assembly, Thermal Overload Protection, Upper and Lower Sleeve Bearing, Metal Insert
• Application Dewatering, Effluent System, Sewage
• Weight 35.5 Lb

Install Instructions
Specification Sheet

The Sizing of Effluent Systems Normally Requires Variable Level Floats Controls and Properly Sized Basins to Achieve Required Pumping Cycles or Dosing Timers with Non Automatic Pumps