53-0001 Zoeller M53 Mighty-Mate Cast Iron Automatic Effluent Submersible Sump Pump 115V 9.7 Amps 1/3 HP 1550 RPM 1PH With 1-1/2" Discharge Size And 1-1/2" NPT Discharge End Connection And 9 Ft. Power Cord

• Dewatering Effluent Pump
• Type Submersible, Vertical
• Applicable Standard UL 778, CSA (Canada and US), CSA C22.2, SSPMA
• Discharge Size 1-1/2"
• End Connection Threaded Outlet
• Overall Dimensions 10.062" Length x 7-7/8" Width x 10-1/16" Height
• Float Type 2-Pole Single/Double Piggyback Variable Level Mechanical
• Flow Rate 19 to 43 GPM
• Discharge Head 5 to 15'
• Casing Material Powder Coated Epoxy Finished Cast Iron
• Shaft Material AISI 1215 Cold Rolled Steel
• Housing Material Powder Coated Epoxy Finished Cast Iron
• Impeller Material Glass Filled Plastic
• Impeller Design Non-Clogging Vortex
• Shaft Seal Details Carbon-Ceramic Face Mechanical Seal
• Solid Size 1/2"
• Power Cord Length 9'
• Power Rating 3/10 HP
• Input Supply Rating 115 Volt 60 Hertz 1 Phase 9.7 Amp
• Speed Rating 1550 RPM
• Temperature Rating 130 Deg F
• Motor Type Oil Filled Hermetically Sealed
• Options Pump Stand
• Inclusions/Features Automatic Operation, Stainless Steel Arm, Guard, Handle and Screw, Upper and lower Sleeve Bearing, Watertight Neoprene O-Ring, Metal Inserts, Automatic Reset Thermal Overload Protected
• Application Dewatering, Effluent System, Sump

Install Instructions
Specification Sheet

The Sizing of Effluent Systems Normally Requires Variable Level Floats Controls and Properly Sized Basins to Achieve Required Pumping Cycles or Dosing Timers with Non Automatic Pumps