98-0001 Zoeller M98 Flow-Mate Cast Iron Automatic Effluent Sump Pump 115V 9.4 Amps 1/2 HP 1725 RPM 1PH With 1-1/2" Discharge Size And 1-1/2" NPT Discharge End Connection

• Dewatering Effluent Pump
• Type Submersible
• Applicable Standard UL, CSA (Canada and US), SSPMA
• Discharge Size 1-1/2"
• End Connection Threaded Outlet
• Overall Dimensions 10-1/8" Length x 7-7/8" Width x 12-1/16" Height
• Float Type 2-Pole Single/Double Piggyback Variable Level Mechanical
• Flow Rate 72 GPM
• Discharge Head 23'
• Casing Material Powder Coated Epoxy Finished ASTM Class 25 Cast Iron
• Shaft Material AISI 1215 Cold Rolled Steel
• Housing Material Cast Iron
• Impeller Material Plastic
• Impeller Design Non-Clogging Vortex
• Shaft Seal Details Carbon-Ceramic Face Mechanical Seal
• Solid Size 1/2"
• Power Cord Length 15'
• Power Rating 1/2 HP
• Input Supply Rating 115 Volt 60 Hertz 1 Phase 9.4 Amp
• Speed Rating 1725 RPM
• Temperature Rating 130 Deg F
• Motor Type Oil Filled Hermetically Sealed, Permanent Split Capacitor
• Inclusions/Features Automatic Operation, Cast Switch Case, Motor, Pump Housing and Base, No Sheet Metal Parts to Rust or Corrode, Stainless Steel Screws, Guard, Handle, Arm and Seal Assembly, Mechanical Switch, Upper and Lower Oil Fed Cast Iron Bearing, Entire Unit Pressure Tested After Assembly, Watertight Neoprene Ring Between Motor and Pump Housing, No Screens to Clog
• Application Dewatering, Effluent System, Sump, Septic Tank, Enhanced Flow Step Systems
• Weight 36 Lb

Install Instructions
Specification Sheet

The Sizing of Effluent Systems Normally Requires Variable Level Floats Controls and Properly Sized Basins to Achieve Required Pumping Cycles or Dosing Timers with Non Automatic Pumps