0390171015 2" X 3/4" Female NPT Painted Mechanical Tee Figure #7045

• Saddle Tee Fitting
• Type Single Outlet, Tee
• Applicable Standard UL, FM, ULC, VdS, LPCB
• Nominal Pipe Size 2"
• Outlet Connection 3/4" Female Threaded
• Material Ductile Iron
• Material Specification ASTM A 536 Grade 65-45-12
• Process Cast
• Finish Orange Painted
• Mounting Type (2) Bolt
• Pressure Rating 500 PSI
• Temperature Rating -34 to 110 Deg C
• Application Hot Water, Dilute Acids, Oil Free Air, Chemicals
• Lead Free
• Hole Diameter 1.5 to 1.63"
• Maximum End Load 433 Lb
• Bolt Size 3/8" Diameter x 2-1/4" Length
• Weight 2.3 Lb
• Warranty 10 Year Limited

Install Instructions
Specification Sheet

The Gruvlok Clamp-T provides a quick and easy outlet at any location along the pipe. A hole drilled or cut in the pipe to receive the locating collar of the Clamp-T is all that is required. The full, smooth outlet area provides for optimum flow characteristics. The Clamp-T housing is specially engineered to conform to the pipe O.D. and the Clamp-T gasket providing a leak tight reliable seal in both positive pressure and vacuum conditions. The maximum working pressure for all sizes is 500 PSI (34.5 bar) when assembled on standard wall steel pipe. The Gruvlok Clamp-T provides for a branch or cross connection in light wall or standard wall steel pipe. The Fig. 7045 Clamp-T female pipe thread branch is available with NPT or ISO 7/1 connection and the Fig. 7046 Clamp-T has grooved-end branch connection. Clamp-T cross connections are available in various sizes allowing greater versatility in piping design.