RGS2012P Goulds 2 HP 230V 1 Phase Grinder Pump With 20' Cord (Plug)

• Grinder Pump
• Type Submersible
• Applicable Standard UL 778, CSA 22.2 108, UL, CSA (Canada and US)
• Discharge Size 1-1/4"
• End Connection Threaded Outlet
• Overall Dimensions 11-1/8" Length x 8-1/4" Width x 18-1/2" Height
• Flow Rate 41 GPM
• Discharge Head 95'
• Casing Material ASTM A48, Class 30 Gray Cast Iron
• Shaft Material 300 Stainless Steel
• Housing Material ASTM A48, Class 30 Gray Cast Iron
• Cutter Material 400C Stainless Steel
• Warranty 12 Month from Date of Installation, 18 Month from Date of Manufacture
• Shaft Seal Details Silicon Carbide-Silicon Carbide Face Mechanical Seal
• Starts per Hour 10
• Power Cord Length 20'
• Power Rating 2 HP
• Input Supply Rating 208/230 Volt at 60 Hertz 1 Phase 15 Amp
• Speed Rating 3450 RPM
• Temperature Rating 104 Deg F Continuous, 140 Deg F Intermittent
• Pressure Rating 50 PSI
• Motor Type Class F Insulation, Oil Filled
• Inclusions/Features Power Cable, Motor Cover, Bearing, Seal, Casing, Impeller, Motor Shaft, Motor Overload Protection, External Hardware, Impeller, Cutter
• Exclusions Pump Leg
• Application Residential Sewage
• Thermal Load Protection Automatic Reset
• Impeller Design Semi Open
• Impeller Size 5.69" Diameter
• Motor Efficiency 70 percent
• Oil Capacity 0.88 Gallon
• Weight 75 Lb

Install Instructions
Specification Sheet

Capable of Grinding Domestic Sewage in Individual Residential Applications. Cutter System are Anti-Roping Design. Two Blade Rotary Cutter is Threaded to Shaft. Stationary Cutter Ring is Reversible for Extended Service. Impeller are Silicon Bronze, Semi-Open, Non-Overloading Two-Vane Design with Pump-Out Vanes for Mechanical Seal Protection. Balanced for Smooth Operation. Motor Fully Submerged in Oil-Filled Chamber. High Grade Turbine Oil Surrounds Motor for More Efficient Heat Dissipation, Permanent Lubrication of Bearings and Mechanical Seal and Protection Against Outside Environment. Designed for Continuous Operation. Pump Ratings are Within the Motor Manufacturer's Recommended Working Limits Can be Operated Continuously Without Damage when Fully Submerged. Upper and Lower Ball Bearings for Precision Positioning of Parts and to Carry All Radial and Thrust Loads. Hardfaced Silicon Carbide for Longer Life, Stainless Steel Metal Parts, Buna-N Elastomers. Power Cable is Severe Duty Rated, Oil and Water Resistant. Epoxy Seal on Motor End Provides Secondary Moisture Barrier in Case of Outer Jacket Damage and to Prevent Oil Wicking. 12 Month from Date of Installation, 18 Month from Date of Manufacture Warranty.