HT41A Liberty 4/10 HP 115V High Temp Submersible Pump

• Submersible Pump
• Applicable Standard UL, SSPMA
• Discharge Size 1-1/2"
• End Connection Female Threaded Outlet
• Overall Dimensions 9" Length x 7.7" Width x 11.2" Height
• Float Type Piggy Back, On/Off Switch
• Flow Rate 60 GPM
• Discharge Head 16'
• Casing Material Class 25 Cast Iron
• Shaft Material 416 Stainless Steel
• Housing Material Class 25 Cast Iron
• Impeller Material Thermoplastic
• Impeller Design Vortex
• Warranty 3 Year
• Shaft Seal Details Carbon/Ceramic Unitized Design, High Temperature Elastomer
• Solid Size 3/4"
• Power Cord Length 10'
• Power Rating 4/10 HP
• Input Supply Rating 115 Volt at 60 Hertz 1 Phase 12 Amp
• Speed Rating 1550 RPM
• Temperature Rating 200 Deg F
• Motor Type Class F Insulation, Oil Filled, Hermetically Sealed, Thermally Protected
• Inclusions/Features Automatic System, Permanently Lubricated Bearings, UL Approved Power Cord, The Pump Volute, Legs and Motor Housing Shall be Heavy Gray Iron Castings, Class 25 or Better, The Pump Shall be Controlled by an Adjustable Mercury Free Switch and Shall have a Series Plug for Manual By-Pass Operation
• Application Hot Water Transfer, Boiler Blowdown Pit, Condensate Pit
• Rotor Current Rating 23 Amp
• Maximum Stator Temperature Rating 311 Deg F
• Thermal Overload 302 Deg F
• Weight 36 Lb

Install Instructions
Specification Sheet

Designed for Hot Water Application; 416 Stainless Steel Rotor Shaft; Oil-Filled, thermally Protected Motor; Permanently Lubricated Bearings; Unitized Shaft Seal; 10' UL Approved Power Cord with Quick Seal; 3 Year Warranty