525-161PB Sioux Chief StrongArm Stub Out Bracket With 1 Plastic Pex Bend

• Use when stubbing out with 1/2" flexible CTS tube
• StrongArm brackets provide a very rigid installation
• Plastic elbow swivels 360 to work with tubing coming from any direction
• PEX Bend LockBlocks are pre-assembled on each pair of brackets
• Position stub outs at any desired location within the stud bay
• Twisted brackets mount to face of stud, and L-bent brackets mount inside stud cavity
• When screws on blocks are tightened, blocks compress on tube, brackets and elbow eliminating all movement

Install Instructions
Specification Sheet

Sioux Chief 525-PB series StrongArm with Plastic Bend Support preassembled bracketing system shall be used when penetrating a wall with 1/2" PEX. Brackets shall be corrosion-resistant and secured to wood or metal studs with approved hardware. System shall include plastic bend (elbow) device that swivels 360 when captured within a LockBlock assembly. Plastic Bend Support shall slide across pair of parallel brackets allowing installer to secure 1/2" PEX tube at any desired location within the stud cavity. Bracket assembly with Plastic Bend Support devices and bulk components shall be IAPMO listed.