550-PB2 Sioux Chief 1/2" CTS Simple Bend Support

• No sharp edges to cut installer's hand or pipe
• Strong, durable material yet lightweight
• Max load: 125 lbs
• Will not fracture in extremely cold temperatures
• Cut to desired length
• Install nail or screw at least 1" from end of strap

Install Instructions
Specification Sheet

Sioux Chief's Simple Bend Support is designed support 1/2" or 3/4" PEX when penetrating a wall. The Simple Bend Support shall also be used to re-direct 1/2" or 3/4" PEX tubing thus eliminating two crimp joints. Design shall include a bend radius such that the elbow does not kink the tube. A minimum of 3 formed ribs provides strength and maintains the radius once elbow is mounted the side of a stud or joist, or installed on the tube to re-direct the run. Minimally, there shall be two small holes located on the center tab of the elbow, which are used to secure the elbow to the structure.