267-0001 Zoeller M267 Waste-Mate Cast Iron Automatic Sewage Pump With Plastic Impeller 115V 1/2 HP 10.4 Amps 1725 RPM 1PH With 2" Discharge Size And 3" NPT Discharge End Connection And 10 Ft. Power Cord

• Dewatering Effluent Pump
• Type Submersible
• Applicable Standard UL 778, CSA (Canada and US), CSA C22.2, SSPMA
• Discharge Size 2"
• End Connection Threaded Outlet
• Overall Dimensions 13.06" Length x 11.218" Width x 14-5/8" Height
• Float Type 2-Pole Single/Double Piggyback Variable Level Mechanical
• Flow Rate 45 to 115 GPM
• Discharge Head 5 to 15'
• Casing Material Powder Coated Epoxy Finished ASTM Class 25 Cast Iron
• Shaft Material AISI 1215 Cold Rolled Steel
• Housing Material Powder Coated Epoxy Finished ASTM Class 25 Cast Iron
• Impeller Material Plastic
• Impeller Design Non-Clogging Vortex
• Shaft Seal Details Carbon-Ceramic Face Mechanical Seal
• Solid Size 2"
• Power Cord Length 10'
• Power Rating 1/2 HP
• Input Supply Rating 115 Volt 60 Hertz 1 Phase 10.4 Amp
• Speed Rating 1725 RPM
• Temperature Rating 130 Deg F
• Motor Type Oil Filled Hermetically Sealed
• Options Cast Iron Impeller
• Inclusions/Features Automatic Operation, Stainless Steel Arm, Bolt, Guard, Handle and Screw, Seal Assembly, Square Ring and Gasket, Oil Lubricated Bearing, Metal Inserts, Automatic Reset Thermal Overload Protected
• Application Dewatering, Sewage, Effluent System
• Weight 47.5 Lb

Install Instructions
Specification Sheet

The Sizing of Effluent Systems Normally Requires Variable Level Floats Controls and Properly Sized Basins to Achieve Required Pumping Cycles or Dosing Timers with Non Automatic Pumps