295-0004 Zoeller E295 High-Head Waste-Mate Vertical Cast Iron Manual High-Head Sewage Pump With 2 HP 230V 60 Hz 17.1 Amps 3450 RPM 1PH With 2" NPT Flanged Discharge And 20 Ft. Power Cord

• Sewage Pump
• Type Submersible, Vertical
• Applicable Standard CSA (Canada and US), CSA C22.2, SSPMA, UL 778
• Discharge Size 2", 3"
• End Connection Female Threaded Outlet
• Overall Dimensions 12.875" Length x 8.25" Width x 21-3/16" Height
• Float Type 2-Pole Single/Double Piggyback Variable Level Mechanical
• Flow Rate 23 to 214 GPM
• Discharge Head 5 to 70'
• Casing Material Powder Coated Epoxy Cast Iron
• Shaft Material 1117 Carbon Steel/416 Stainless Steel
• Housing Material Powder Coated Epoxy Cast Iron
• Impeller Material C89833 Bronze
• Impeller Design Non-Clogging Vortex
• Shaft Seal Details Carbon-Ceramic Face Mechanical Seal
• Solid Size 2"
• Power Cord Length 20'
• Power Rating 2 HP
• Input Supply Rating 230 Volt 60 Hertz 1 Phase 17.1 Amp
• Speed Rating 3450 RPM
• Temperature Rating 130 Deg F
• Motor Type Oil Filled Hermetically Sealed
• Inclusions/Features Non Automatic Operation, Stainless Steel Arm, Bolt, Float Rod, Guard, Handle, and Screw, Seal Assembly, Thermal Overload Protection, Upper and Lower Ball Bearing, Neoprene Cord and Plug
• Application Dewatering
• Weight 88 Lb

Install Instructions
Specification Sheet

The Sizing of Effluent Systems Normally Requires Variable Level Float's Controls and Properly Sized Basins to Achieve Required Pumping Cycles or Dosing Timers with Non Automatic Pumps